EFFECT OF REFINER LOAD ON PAPERMAKING POTENTIAL OF CELLULOSIC PULP
Marcin Dubowik, Piotr Przybysz, Marta Kucner, Kazimierz Przybysz, Edyta Małachowska
Strony: 232-238
Opublikowano: 1 Jul 2016
Wyświetlenia: 2,179
Pobrania: 555
Streszczenie: This article presents the impact of laboratory refiner load on papermaking potential of paper. Bleached pinewood kraft pulp from one of paper mills was used for the investigation. The main goal of the work was to investigate the influence of refiner load on properties of paper. According to scientific literature it is assumed that lower refiner load enable to obtain paper of high tensile properties but requires longer refining time. This concept was investigated in this work. Cellulosic pulp was refined in Valley beater and after refining properties of both pulp and paper were investigated. The obtained results have led to conclusions that there is a minimal refining load which is necessary produce paper with sufficient tensile properties. Moreover, observed differences in paper properties for different refining load after exceeding this minimal value are not very significant. Furthermore, detailed characteristics of paper refined using different load from 1,361 kG up to 8,165 kG are presented.
Słowa kluczowe: refining, valley beater, wrv, refiner load, breaking length, tear resistance
Cytowanie artykułu: Marcin Dubowik, Piotr Przybysz, Marta Kucner, Kazimierz Przybysz, Edyta Małachowska. EFFECT OF REFINER LOAD ON PAPERMAKING POTENTIAL OF CELLULOSIC PULP. Journal of International Scientific Publications: Materials, Methods & Technologies 10, 232-238 (2016). https://www.scientific-publications.net/en/article/1001146/
Powrót do spisu treści tomu
© 2025 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
