ANALYSIS OF CLEANED WASTE GLASS AND UTILISATION IN THE NORMAL STRENGTH CONCRETE
Serelis Evaldas, Vaitkevicius Vitoldas
Strony: 8-20
Opublikowano: 23 Sep 2021
Wyświetlenia: 1,048
Pobrania: 163
Streszczenie: The article investigates the possibilities to utilize waste glass in normal strength concrete. Waste glass was obtained from a local dumpsite. In the research glass shard were prepared in two ways: before and after cleaning process. Before cleaning process waste glass used as it is and contained all impurities. After the cleaning process, most impurities in waste glass were washed out. Waste glass shard was crushed in a ball mill, then analysed by scanning electron microscopy (SEM) and energy-dispersive xray spectroscopy (EDX). Effect of waste glass powder before and after cleaning process on Portland cement hydration process was analysed by the semi-adiabatic calorimetry test method. For further research other properties such as density, compressive strength and porosity of normal strength concrete with different amount of waste glass powder also were investigated. In the experiment was found out, that when 25 % of ordinary sand is replaced by waste glass powder after the cleaning process, can be expected slight gain in compressive strength.
Słowa kluczowe: waste of glass powder, semi-adiabatic calorimeter, sem analysis, hydration process analysis
Cytowanie artykułu: Serelis Evaldas, Vaitkevicius Vitoldas. ANALYSIS OF CLEANED WASTE GLASS AND UTILISATION IN THE NORMAL STRENGTH CONCRETE. Journal of International Scientific Publications: Materials, Methods & Technologies 15, 8-20 (2021). https://www.scientific-publications.net/en/article/1002193/
Powrót do spisu treści tomu
© 2025 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
