INVESTIGATION OF THE PROCESSABILITY OF DIFFERENT HIGH-PERFORMANCE MATERIALS IN THE FDM PROCESS WITH REGARD TO THE SHRINKAGE BEHAVIOR
Julian Wächter, Carsten Fuhrmann, Elmar Moritzer
Strony: 58-67
Opublikowano: 23 Sep 2021
Wyświetlenia: 807
Pobrania: 93
Streszczenie: Due to the great popularity of the Fused Deposition Modeling (FDM) process, the material market is growing. In particular, processing of high-temperature materials such as PEEK or PPSU is challenging. The aim of the investigations is to test different high-performance materials regarding their processability in the FDM process. An unreinforced PEEK, an unreinforced PPSU and a glass fiber reinforced PP are investigated. The processability is assessed by examining the shrinkage and warpage behavior. The assessment of the amount of warpage is carried out by building test specimens. For this purpose, a method developed at the DMRC is used. In addition, the influence of the position of the test specimens in the build chamber is investigated. By this, the influences of varying nozzle and build chamber temperatures on the achievable amount of warpage can be evaluated.
Słowa kluczowe: fdm, peek, ppsu, pp, processability, warpage, parameter optimization
Cytowanie artykułu: Julian Wächter, Carsten Fuhrmann, Elmar Moritzer. INVESTIGATION OF THE PROCESSABILITY OF DIFFERENT HIGH-PERFORMANCE MATERIALS IN THE FDM PROCESS WITH REGARD TO THE SHRINKAGE BEHAVIOR. Journal of International Scientific Publications: Materials, Methods & Technologies 15, 58-67 (2021). https://www.scientific-publications.net/en/article/1002198/
Powrót do spisu treści tomu
© 2025 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
