BASIC MECHANICAL PROPERTIES OF PASTE FACADE RENDER MIXES WHEN INCORPORATING PHOTOCATALYTIC TITANIUM DIOXIDE
Jan Přikryl, Tomáš Melichar
Strony: 433-445
Opublikowano: 1 Jan 2009
Wyświetlenia: 257
Pobrania: 46
Streszczenie: Paste facade renders are produced mainly to supply new activity within the building industry or the increasing trend of applying exterior thermal insulation to pre-constructed domestic houses and flats. These facade renders are supplied in a soft paste form, dispersed with differing binding agents, such as acrylate, silicon, or silicate. White titanium dioxide (TiO2), in the crystalline form of surface treated rutile, is commonly used as the basic colouring component, subsequently being tinted with other pigments to offer a range of colour shades. This paper describes the substitution of rutile TiO2 with the alternate TiO2 crystalline form of anatase, that being photocatalytic in a nano-particle size. Two series of samples were suggested and produced, the first set was retained at common conditions (reference specimens) whereas the second series of samples was exposed to UV radiation. Then, differences between the main physical and mechanical properties of the two series were examined.
Słowa kluczowe: paste, facade, render, photocatalysis, titanium dioxide, adhesive strength, water vapour permeability, water resistance
Cytowanie artykułu: Jan Přikryl, Tomáš Melichar. BASIC MECHANICAL PROPERTIES OF PASTE FACADE RENDER MIXES WHEN INCORPORATING PHOTOCATALYTIC TITANIUM DIOXIDE. Journal of International Scientific Publications: Materials, Methods & Technologies 3, 433-445 (2009). https://www.scientific-publications.net/en/article/1003500/
Powrót do spisu treści tomu
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
