EVALUATION OF THE BIOACTIVITY PROPERTIES OF SILVER DOPED HYDROXYAPATITE DEPENDING ON THE PREPARATION METHOD
L. Poca, A. Dubnika, D. Loca, L. Berzina-Cimdina
Pagini: 612-620
Publicat: 2 Jun 2014
Vizualizări: 4,242
Descărcări: 1,835
Citations: 1 (Google Scholar)
Citations: 1 (OpenAlex)
Rezumat: In the present study in vitro bioactivity properties of silver doped hydroxyapatite (HAp/Ag) ceramic scaffolds were evaluated. HAp/Ag powder samples with 0.3 - 2.0 wt % of silver were prepared by two different modified wet precipitation methods at 90°C temperature. The Obtained fine HAp/Ag powder was used to prepare dense and porous HAp/Ag ceramic scaffolds. The bioactivity properties of dense and porous HAp/Ag ceramics scaffolds were determined in simulated body fluid (SBF). The scanning electron microscopy (SEM) investigations showed a nucleation process of calcium containing crystals and formation of bone-like apatite layer on the surface of HAp/Ag ceramic scaffolds. SEM microphotographs showed that the formed apatite layer on the dense HAp/Ag scaffolds was thicker if compared with porous HAp/Ag ceramic scaffolds. Significant differences in the formation process of bone-like apatite layer could be attributed to the differences of scaffold porosity, surface morphology and distribution of silver particles throughout the HAp/Ag ceramic scaffolds.
Cuvinte cheie: hydroxyapatite, silver, in vitro, bioactivity, sbf solution
Citează acest articol: L. Poca, A. Dubnika, D. Loca, L. Berzina-Cimdina. EVALUATION OF THE BIOACTIVITY PROPERTIES OF SILVER DOPED HYDROXYAPATITE DEPENDING ON THE PREPARATION METHOD. Journal of International Scientific Publications: Materials, Methods & Technologies 8, 612-620 (2014). https://www.scientific-publications.net/en/article/1000212/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
