HIGH-PURITY ALUMINA PRODUCTION TECHNOLOGY: HYDROTHERMAL OXIDATION OF ALUMINUM AND FOLLOWING THERMAL TREATMENT
Andrey Zhuk, Mikhail Vlaskin, Evgeny Shkolnikov, Grayr Ambaryan
Pagini: 378-385
Publicat: 31 May 2015
Vizualizări: 2,888
Descărcări: 1,310
Rezumat: A new technology producing high purity alumina has been developed. Initial reagents for this technology are industrial aluminum micron powder of technical purity (99.8 %) and distilled water. The core of technology is hydrothermal oxidation of aluminum, which is carried out (under about 300 °С and 15 MPa) in special reactor developed for continuous and large-scale production. Conversion degree of aluminum is 100 %. Purity of produced alumina is 99.997 %, i.e. the impurity concentration doesn’t exceed 30 ppm. Produced alumina was successfully used for the production of alumina monocrystal.
Cuvinte cheie: high-purity alumina, hydrothermal oxidation of aluminum, boehmite, hydrogen, sapphire, nanostructured alumina
Citează acest articol: Andrey Zhuk, Mikhail Vlaskin, Evgeny Shkolnikov, Grayr Ambaryan. HIGH-PURITY ALUMINA PRODUCTION TECHNOLOGY: HYDROTHERMAL OXIDATION OF ALUMINUM AND FOLLOWING THERMAL TREATMENT. Journal of International Scientific Publications: Materials, Methods & Technologies 9, 378-385 (2015). https://www.scientific-publications.net/en/article/1000785/
Înapoi la cuprinsul volumului
© 2025 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
