EFFECTS OF SPINNING PARAMETERS ON MORPHOLOGY OF POLY(VINYLIDENE FLUORIDE) HOLLOW FIBER
Lai Ling Wong, Siek Ting Yong, Chien Wei Ooi, Abdul Wahab Mohammad
Pagini: 254-265
Publicat: 29 Jul 2017
Vizualizări: 2,416
Descărcări: 480
Rezumat: Poly(vinylidene fluoride) (PVDF) hollow fiber with asymmetric sponge-like structure was fabricated through immersion precipitation. The extrusion speed ratio and the type of dope solvent used in the spinning of hollow fiber were investigated. The extrusion speed ratios of 2:1, 4:1, and 8:1 were chosen for investigation, while two different solvents which were N-methyl-2-pyrrolidone (NMP) and N,N-dimethylacetamide (DMAc). These two solvents were used for polymer dope preparation. The highest extrusion speed ratio (8:1) showed the best feature required and hence it was chosen to investigate the effect of the different solvents. Investigations revealed higher extrusion speed ratio with the lowest extrusion speed successfully avoided die swell phenomenon, and produced asymmetric sponge-like membrane with high mechanical strength. With the application DMAc as solvent, macrovoids were significantly reduced and mechanical strength was increased. The results showed that the manipulation of the spinning conditions which were essential for hollow fiber fabrication to acquire distinctive characteristics for various industrial applications.
Cuvinte cheie: poly(vinylidene fluoride), hollow fiber membrane, morphology
Citează acest articol: Lai Ling Wong, Siek Ting Yong, Chien Wei Ooi, Abdul Wahab Mohammad. EFFECTS OF SPINNING PARAMETERS ON MORPHOLOGY OF POLY(VINYLIDENE FLUORIDE) HOLLOW FIBER. Journal of International Scientific Publications: Materials, Methods & Technologies 11, 254-265 (2017). https://www.scientific-publications.net/en/article/1001471/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
