THE EFFECT OF FIBER ORIENTATION ON THE DRY WEAR BEHAVIOUR OF CARBON FIBRE-REINFORCED EPOXY COMPOSITES
Y. Şahin, A. Tokdede, M. Yankaş
Pagini: 317-325
Publicat: 29 Jul 2017
Vizualizări: 2,657
Descărcări: 375
Citations: 4 (Google Scholar)
Citations: 1 (OpenAlex)
Rezumat: Carbon fibre-reinforced epoxy composites containing unidirectional carbon fibres was fabricated by moulding technique. The effect of fibre orientation on the dry wear of the composites and its epoxy matrix was investigated in a pin-on-disc type of configuration against SiC emery paper. Response surface methodology (RSM) was applied to analyze the weight loss results. The experimental results indicated that the maximum weight loss was found when the fibres were oriented anti-parallel to the sliding direction in each case. Furthermore, the weight loss increased with increasing the speed and load. Analysis of variance indicated that the weight loss was highly influenced by rotational speed and load, respectively. However, the least effect was obtained for the materials type.
Cuvinte cheie: composite, epoxy, carbon fibre, fibre orientation, load, weight loss
Citează acest articol: Y. Şahin, A. Tokdede, M. Yankaş. THE EFFECT OF FIBER ORIENTATION ON THE DRY WEAR BEHAVIOUR OF CARBON FIBRE-REINFORCED EPOXY COMPOSITES. Journal of International Scientific Publications: Materials, Methods & Technologies 11, 317-325 (2017). https://www.scientific-publications.net/en/article/1001477/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
