THE EFFECT OF FIBER ORIENTATION ON THE DRY WEAR BEHAVIOUR OF CARBON FIBRE-REINFORCED EPOXY COMPOSITES
Published: 29 Jul 2017
Abstract: Carbon fibre-reinforced epoxy composites containing unidirectional carbon fibres was fabricated by moulding technique. The effect of fibre orientation on the dry wear of the composites and its epoxy matrix was investigated in a pin-on-disc type of configuration against SiC emery paper. Response surface methodology (RSM) was applied to analyze the weight loss results. The experimental results indicated that the maximum weight loss was found when the fibres were oriented anti-parallel to the sliding direction in each case. Furthermore, the weight loss increased with increasing the speed and load. Analysis of variance indicated that the weight loss was highly influenced by rotational speed and load, respectively. However, the least effect was obtained for the materials type.
Keywords: composite, epoxy, carbon fibre, fibre orientation, load, weight loss
Download full text
Back to the contents of the volume
© 2019 The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License http://creativecommons.org/licenses/by/3.0/
, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.