FRACTURE CHARACTERIZATION OF EPOXY ADHESIVES USING PRE-CRACKED CT SAMPLES
M. Casasola, M.J. Lamela, A. Fernández-Canteli, Miguel Muñiz-Calvente, F. Pelayo, Adrián Álvarez-Vázquez, A. Salazar, J.M. Pintado
Pagini: 25-37
Publicat: 18 Sep 2019
Vizualizări: 2,039
Descărcări: 231
Rezumat: In this paper the critical stress intensity factor (KIC) and the critical strain energy release rate (GIC) were determined for the epoxy resin EPOLAM 2025 following the D5045 standard and using Compact Tension (CT) specimens. Given the difficulty to produce a pre-crack at the tip of the notch of the CT sample, that fulfils the standard requirements, alternative experimental methods were attempted. Furthermore, a finite element analysis using the commercial Abaqus code was carried out to obtain the fracture parameters numerically and to study the relationship between the crack length and KI. Although the fracture parameters obtained experimentally are within the range of values expected for such a material, they may not be precise because of the inaccuracy of the pre-cracks. No alternative pre-cracking method was found to be more adequate than the one used in this work, but its efficiency could be proved numerically.
Cuvinte cheie: epoxy resin, fracture characterization, testing, numerical analysis
Citează acest articol: M. Casasola, M.J. Lamela, A. Fernández-Canteli, Miguel Muñiz-Calvente, F. Pelayo, Adrián Álvarez-Vázquez, A. Salazar, J.M. Pintado. FRACTURE CHARACTERIZATION OF EPOXY ADHESIVES USING PRE-CRACKED CT SAMPLES. Journal of International Scientific Publications: Materials, Methods & Technologies 13, 25-37 (2019). https://www.scientific-publications.net/en/article/1001876/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
