IN-SITU MONITORING ALUMINA DURING ALUMINIUM ELECTROLYTIC PRODUCTION
Andrey V. Suzdaltsev, Andrey Yu. Nikolaev, Olga B. Pavlenko, Yuriy P. Zaikov
Pagini: 19-24
Publicat: 12 Sep 2020
Vizualizări: 1,719
Descărcări: 215
Rezumat: Alumina content in electrolysis cells for aluminum production is one of the most important and poorly controlled parameters. In order to check the current value of alumina content as well as the dissolution of alumina in industrial electrolytes (NaF-AlF3-CaF2-Al2O3), a novel electrochemical sensor was proposed. It was comprised of a carbon working electrode and a counter electrode interacting with aluminum. The sensor was easy to manufacture, and it allowed reducing the measurement error associated with back reactions at the working electrode. The novel approach was considered on an example of dissolving the alumina in the NaF-AlF3-(5 wt%)CaF2 melt ([NaF]/[AlF3] = 2.1 mol/mol) containing alumina (Al2O3) in amount of 0.69-4.51 wt% at 995 °C in conditions of natural and forced convection. It was found that the alumina solubility in the studied melt was 4.51 wt%. Depending on the initial content of alumina in the melt and convection conditions, its dissolution rate varied up to 0.36 mol/s·m3.
Cuvinte cheie: aluminum electrolysis, alumina dissolution, electrochemical sensor, voltammetry
Citează acest articol: Andrey V. Suzdaltsev, Andrey Yu. Nikolaev, Olga B. Pavlenko, Yuriy P. Zaikov. IN-SITU MONITORING ALUMINA DURING ALUMINIUM ELECTROLYTIC PRODUCTION. Journal of International Scientific Publications: Materials, Methods & Technologies 14, 19-24 (2020). https://www.scientific-publications.net/en/article/1002044/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
