CORROSION BEHAVIOR OF LOW-CARBON STEEL COATED WITH DIFFERENT TYPE OF TIO2/ZRO2 LAYERS
Irina D. Stambolova, Nelly D. Boshkova, Daniela D. Stoyanova, Vladimir N. Blaskov, Silviya S. Simeonova, Nikolai St. Boshkov
Pagini: 300-307
Publicat: 12 Nov 2020
Vizualizări: 1,670
Descărcări: 166
Citations: 4 (Google Scholar)
Citations: 3 (OpenAlex)
Rezumat: Two type of multilayer structures based on ZrO2 coatings deposited on TiO2 were applied on low carbon steel and their structure, composition and anticorrosion properties were evaluated in 5%NaCl salt medium. The phase composition, morphology and the elemental distribution of the coatings were investigated using X-ray diffraction analysis, Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM) and energy dispersive X-ray analysis (EDX). The corrosion performance of the coatings was evaluated by potentiodynamic polarization measurements (PD). The zirconia/titania mixed oxide coating exhibited an enhanced corrosion resistance than those of the low carbon steel as indicаted by the reduced current density, probably due to the presence of amorphous structure on the layers and dense surface without visible cracks and pits (barrier effect).
Cuvinte cheie: corrosion protection, dip coating, barrier properties, morphology
Citează acest articol: Irina D. Stambolova, Nelly D. Boshkova, Daniela D. Stoyanova, Vladimir N. Blaskov, Silviya S. Simeonova, Nikolai St. Boshkov. CORROSION BEHAVIOR OF LOW-CARBON STEEL COATED WITH DIFFERENT TYPE OF TIO2/ZRO2 LAYERS. Journal of International Scientific Publications: Materials, Methods & Technologies 14, 300-307 (2020). https://www.scientific-publications.net/en/article/1002130/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
