AN EXPERIMENTAL SETUP FOR INSOLATION FAULT DETECTION OF XLPE CABLES
Fatih Serttaş, Ardan Hüseyin Eşlik, Fatih Onur Hocaoğlu, Tuba Nur Serttaş
Pagini: 75-81
Publicat: 30 Nov 2023
DOI: 10.62991/MMT1996353799
Vizualizări: 471
Descărcări: 45
Rezumat: Insulation coordination is one of the most critical issues in high-voltage electrical installations. The smallest defect in the insulation will cause major problems in the near future. Timely insulation failure diagnosis can prevent life-threatening occupational accidents. Insulation fault diagnostics create maintenance costs for the business but prevent much larger costs that are highly likely to occur in the long run. This paper presents an experimental setup to detect insulation problems of XLPE cables. The experimental setup is composed of a coupling capacitor, voltage divider circuit, High-Voltage transformer, coupling device, and coaxial cable. The specimen of XLPE cable is connected from the high-voltage side of the transformer and the data is collected from the measuring device connected at the end of the coupling device. The paper presents different test results for different XLPE cable specimens tested on the presented system. It is possible to test different medium or high-voltage cables using the presented experimental setup.
Cuvinte cheie: partial discharge, insolation fault detection, xlpe cable, high-voltage
Citează acest articol: Fatih Serttaş, Ardan Hüseyin Eşlik, Fatih Onur Hocaoğlu, Tuba Nur Serttaş. AN EXPERIMENTAL SETUP FOR INSOLATION FAULT DETECTION OF XLPE CABLES. Journal of International Scientific Publications: Materials, Methods & Technologies 17, 75-81 (2023). https://doi.org/10.62991/MMT1996353799
Înapoi la cuprinsul volumului
© 2025 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
