METHOD OF FULL DISCRETIZATION IN ENGINEERING UNDER CREEP CONDITIONS
Tanya N. Ter-Emmanuilyan, Igor O. Polumordvinov
Pagini: 95-107
Publicat: 1 Jan 2013
Vizualizări: 316
Descărcări: 52
Rezumat: Method of Full Discretization (FDM) is a special modification of the finite element method (FEM) for the solving of various problems of the elastic creep. FDM is a universal, comparatively simple and obvious engineering method being “not step-by-step” in time. It gives an opportunity to determine discrete values of displacements, deformations and stresses in a calculated interval of time. The method is developed both in variant of displacements, and in variant of forces. It can be combined with other engineering numerical methods, such as a method of boundary elements, a method of finite differences and others. The method is applied at the decision of a wide class of engineering problems of a linear and nonlinear elastic creep. For example, a calculation in time of a four-level ferro-concrete construction and its basis, etc.
Cuvinte cheie: method of full discretization, elastic creep, displacements, deformations, stresses, ferro-concrete construction
Citează acest articol: Tanya N. Ter-Emmanuilyan, Igor O. Polumordvinov. METHOD OF FULL DISCRETIZATION IN ENGINEERING UNDER CREEP CONDITIONS. Journal of International Scientific Publications: Materials, Methods & Technologies 7, 95-107 (2013). https://www.scientific-publications.net/en/article/1003142/
Înapoi la cuprinsul volumului
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
