A HIGH PRESSURE "CHECHEVITSA" (LENTIL)-TYPE MINI-CHAMBER MADE FROM SUPERHARD CERAMICS - BASED ON CUBIC BORON NITRIDE
Alexander A. Antanovich, Vladimir A. Sidorov, Alexander N. Pinyagin, Vladimir P. Filonenko
Страницы: 62-67
Опубликовано: 2 Jun 2014
Просмотры: 4,415
Загрузки: 911
Аннотация: This high-pressure chamber is based on the "anvil with recess" design - with a chamber diameter of 5 millimetres, and made from a superhard material based on cubic Boron Nitride. It has been specially developed to work in environments with pressures of up to 10 GPa.
Ключевые слова: high-pressure device, bridgman anvils, lentil-type high-pressure device, superhard materials, cubic boron nitride
Цитировать эту статью: Alexander A. Antanovich, Vladimir A. Sidorov, Alexander N. Pinyagin, Vladimir P. Filonenko. A HIGH PRESSURE "CHECHEVITSA" (LENTIL)-TYPE MINI-CHAMBER MADE FROM SUPERHARD CERAMICS - BASED ON CUBIC BORON NITRIDE. Journal of International Scientific Publications: Materials, Methods & Technologies 8, 62-67 (2014). https://www.scientific-publications.net/en/article/1000147/
Вернуться к содержанию тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
