EFFECT OF OXYGEN CONTENT ON THE NON-ISOTHERMAL OXIDATION OF WASTE SLAG FROM COPPER PRODUCTION
Diana Rabadjieva, Nikolay Marinkov, Yoanna Kostova, Daniela Kovacheva, Stoyko Gyurov, Christina Tzvetkova, Galia Gentscheva, Ivan Penkov
Страницы: 178-187
Опубликовано: 29 Jul 2017
Просмотры: 3,272
Загрузки: 418
Citations: 2 (Google Scholar)
Citations: 1 (OpenAlex)
Аннотация: Oxidation of waste slag from copper production was studied in oxygen-nitrogen gaseous mixtures (21, 43, 63 and 100 vol.% of O2) under non-isothermal conditions using DTA-TG analysis at constant gas flow rate of 30 ml min-1 and varying heating rate. The results revealed that the mechanism of slag oxidation does not change with changing the oxygen content but intensification of the process occurs. Kinetic analysis was performed and a decrease in the values of the activation energy was observed with increasing of the oxygen partial pressure.
Ключевые слова: copper slag oxidation, thermal analysis, dta-tg, kinetic analysis, activation energy
Цитировать эту статью: Diana Rabadjieva, Nikolay Marinkov, Yoanna Kostova, Daniela Kovacheva, Stoyko Gyurov, Christina Tzvetkova, Galia Gentscheva, Ivan Penkov. EFFECT OF OXYGEN CONTENT ON THE NON-ISOTHERMAL OXIDATION OF WASTE SLAG FROM COPPER PRODUCTION. Journal of International Scientific Publications: Materials, Methods & Technologies 11, 178-187 (2017). https://www.scientific-publications.net/en/article/1001464/
Вернуться к содержанию тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
