ADDITIVE METAL PROCESSING TECHNOLOGIES - PROBLEMS AND WAYS OF LEVELING THE SURFACE DEFECTS
Georgi D. Kostadinov, Todor G. Penyashki, Mikhail I. Petrzhik, Aleksandr E. Kudryashov, Blagoj P. Elenov
Страницы: 89-105
Опубликовано: 12 Sep 2020
Просмотры: 2,039
Загрузки: 225
Аннотация: This work provides an overview of the technological features of additive technologies for manufacturing metal parts and products (3D printing metals). The nature and types of printing, perspectives, and opportunities for their development are indicated. The advantages and disadvantages of additive technologies are clarified. An analysis of the technological process parameters has been made, on the basis of which the main problems hindering its mass introduction in the industry have been identified. The main dependencies of the quality and properties of the manufactured parts on the process parameters are given, and ways of avoiding and eliminating the defects are presented.
Ключевые слова: additive production, 3d printing, selective laser melting, laser sintering, dmls, hardening, surface treatment
Цитировать эту статью: Georgi D. Kostadinov, Todor G. Penyashki, Mikhail I. Petrzhik, Aleksandr E. Kudryashov, Blagoj P. Elenov. ADDITIVE METAL PROCESSING TECHNOLOGIES - PROBLEMS AND WAYS OF LEVELING THE SURFACE DEFECTS. Journal of International Scientific Publications: Materials, Methods & Technologies 14, 89-105 (2020). https://www.scientific-publications.net/en/article/1002051/
Вернуться к содержанию тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
