ADVANCED HEAT RECOVERY EQUIPMENT FOR HIGH TEMPERATURE COMBUSTION PLANTS
Boris S. Soroka, Nikita V. Vorobyov, Vladimir A. Zgurskyi, Raisa R. Karabchievskaya
Страницы: 69-83
Опубликовано: 1 Jan 2013
Просмотры: 643
Загрузки: 74
Аннотация: The fundamentals of heat recovery processes and plants (high-temperature recuperators) have been advanced basing upon complex of theoretical, computation (CFD modeling) and experimental researches. Some new designs of high temperature heat recovery facilities for industrial furnaces are under consideration: tube convective recuperators of RE type equipped with the internal inserts – secondary emitters inside the tubes – for metallurgical furnaces, and the high-efficient two-passage radiative recuperators of RRD type – for the furnaces of machinery engineering branch. Benefits of new heat exchangers comparing to the existing analogues have been estimated: provision of additional fuel saving by means of increase the combustion air preheating temperature and rise of recuperator’s thermal stability due to lowering the tube walls temperature.
Ключевые слова: combustion air preheating, heat recovery, high temperature recuperator, heat transfer
Цитировать эту статью: Boris S. Soroka, Nikita V. Vorobyov, Vladimir A. Zgurskyi, Raisa R. Karabchievskaya. ADVANCED HEAT RECOVERY EQUIPMENT FOR HIGH TEMPERATURE COMBUSTION PLANTS. Journal of International Scientific Publications: Materials, Methods & Technologies 7, 69-83 (2013). https://www.scientific-publications.net/en/article/1003040/
Вернуться к содержанию тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
