INFLUENCE OF INLET GAS FLOW VELOCITY ON THE OUTLET MALDISTRIBUTION COEFFICIENT OF GAS FLOW AFTER FOUR TYPES GAS DISTRIBUTION DEVICES

Tatyana St. Petrova

Language

Materials, Methods & Technologies 2026, 28th International Conference

13-16 August, Burgas, Bulgaria

Call for Papers

Materials, Methods & Technologies, Volume 5, 2011

INFLUENCE OF INLET GAS FLOW VELOCITY ON THE OUTLET MALDISTRIBUTION COEFFICIENT OF GAS FLOW AFTER FOUR TYPES GAS DISTRIBUTION DEVICES

Tatyana St. Petrova

Страницы: 191-199
Опубликовано: 1 Jan 2011
Просмотры: 373
Загрузки: 51

Аннотация: Gas flow velocity profiles after four Gas Distribution Devices (GDD), mounted in column with diameter 0.5 m, have been measured experimentally. It is shown that the value of gas flow maldistribution factor (Mf) after each GDD depends on the initial gas flow velocity. The minimal values of Mf for every GDD at the investigated range of initial velocities have been determined. The lowest value for Mf (about 0.16) is reached for GDD №3 at lowest initial velocity (1.3 m/s) and for middle and highest one (1.6 and 2 m/s respectively) lowest Mf have been registered at GDD №4 (about 0.2 ÷ 0.22)

Ключевые слова: gas distribution device, velocity influence, gas maldistribution factor

Цитировать эту статью: Tatyana St. Petrova. INFLUENCE OF INLET GAS FLOW VELOCITY ON THE OUTLET MALDISTRIBUTION COEFFICIENT OF GAS FLOW AFTER FOUR TYPES GAS DISTRIBUTION DEVICES. Journal of International Scientific Publications: Materials, Methods & Technologies 5, 191-199 (2011). https://www.scientific-publications.net/en/article/1003331/

Полный текст Обратная связь

Вернуться к содержанию тома

© 2026 The Author(s). This is an open access article distributed under the terms of the Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.

Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.

Submit Feedback

We value your input! Use this form to report any concerns or provide feedback on our published articles. All submissions will be kept confidential.