FILLING MATERIALS ON THE BASIS OF RAPIDLY RENEWABLE SOURCES
Šárka Keprdová, Jiří Bydžovský
Страницы: 295-307
Опубликовано: 1 Jan 2009
Просмотры: 431
Загрузки: 59
Аннотация: Within the current building industry, there can be seen some efforts to change non-renewable (or more precisely slowly renewable) building raw materials (such as wood, limestone, etc.) for the secondary raw materials or rapidly renewable ones (such as ash, slag, straw, reed, technical hemp) primarily due to environmental and economic reasons. The article is framed towards the use of technical hemp, which is a very required natural raw material intended for the building materials production due to its fast recoverability, high profits and good mechanical characteristics. As one of the possible ways of the technical hemp use, it seems to appear a preparation of non-supportive filling materials for vertical structures, with testing suitable kinds of binders to achieve the required mechanical and at the same time the thermal-technical parameters.
Ключевые слова: technical hemp, filling materials, cement, lime, gypsum
Цитировать эту статью: Šárka Keprdová, Jiří Bydžovský. FILLING MATERIALS ON THE BASIS OF RAPIDLY RENEWABLE SOURCES. Journal of International Scientific Publications: Materials, Methods & Technologies 3, 295-307 (2009). https://www.scientific-publications.net/en/article/1003487/
Вернуться к содержанию тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
