UTILIZATION OF CONSTRUCTION WASTE AS RAW MATERIAL IN MANUFACTURING OF GYPSUM-BASED COMPOSITES
Teodora Tinkova, Georgi Paraskov, Irena Grigorova, Ivan Nishkov
Страници: 414-421
Публикувана: 31 May 2015
Преглеждания: 3,801
Изтегляния: 865
Citations: 1 (Google Scholar)
Резюме: This paper presents a laboratory investigation of new application opportunity of building waste materials and potential usage as a component in production of gypsum based building materials. Production of new type eco-friendly gypsum based composites was studied as a potential utilisation sector. The main focus is directed on gypsum binder mixture properties examination with different proportion of incorporated construction waste materials 5-45%. It was designed and tested fresh state behaviour of gypsum-waste mixture and specimens in standard water/binder ratio. Construction waste material is a fines obtained by combined crushing-sorting installations. Slump flow test of gypsum-waste suspension and dry samples characteristics as compressive and flexural strength, water absorption and shrinkage were tested. On the basis of the obtained results, it was established that the prepared gypsum-waste mixture is an alternative for the production of gypsum based building products. Using the tested mixture in manufacturing processes lead to reduction in the energy and water consumption.
Ключови думи: building waste, composite, sustainability, gypsum
Цитирайте тази статия: Teodora Tinkova, Georgi Paraskov, Irena Grigorova, Ivan Nishkov. UTILIZATION OF CONSTRUCTION WASTE AS RAW MATERIAL IN MANUFACTURING OF GYPSUM-BASED COMPOSITES. Journal of International Scientific Publications: Materials, Methods & Technologies 9, 414-421 (2015). https://www.scientific-publications.net/en/article/1000789/
Обратно към съдържанието на тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
