CORROSION INHIBITION OF THE AZ91D MAGNESIUM ALLOY BY N-SALICYLIDENEANILINE SCHIF BASE COMPOUND
D. Seifzadeh, R. Asadpour Joghani
Страници: 402-411
Публикувана: 11 Jul 2016
Преглеждания: 3,355
Изтегляния: 640
Резюме: The inhibition effect of N-Salicylideneaniline Schiff base against AZ91D alloy corrosion in 0.01 M HCl was examined using potentiodynamic polarization and Electrochemical Impedance Spectroscopy (EIS) methods. The current of both the anodic and cathodic reactions of the corrosion process were decreased while the values of the corrosion potential were not changed significantly indicating that the Schiff base compound acts as mixed–type corrosion inhibitor. EIS measurements were also confirmed the inhibition effect of the Schiff base against AZ91D alloy corrosion. As the inhibitor concentration increased the polarization resistance increased due to more inhibitor adsorption on the surface. Moreover, Scanning Electron Microscopy (SEM), and X–Ray diffraction (XRD) have been used to investigate the corrosion inhibition of the Schiff base compound. SEM images showed that the corrosion damage of the alloy surface reduced in the presence of the Schiff base. The intensity of the characteristic XRD peaks of α phase of the AZ91D alloy was increased in the presence of the Schiff base compound indicating lower corrosion of the alloy sample due to the inhibition effect.
Ключови думи: magnesium alloy, corrosion inhibition, schiff base, eis, sem, xrd
Цитирайте тази статия: D. Seifzadeh, R. Asadpour Joghani. CORROSION INHIBITION OF THE AZ91D MAGNESIUM ALLOY BY N-SALICYLIDENEANILINE SCHIF BASE COMPOUND. Journal of International Scientific Publications: Materials, Methods & Technologies 10, 402-411 (2016). https://www.scientific-publications.net/en/article/1001164/
Обратно към съдържанието на тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
