OPTIMIZATION OF OIL AGGLOMERATION BEHAVIOUR OF COAL BY TAGUCHI DESIGN
Agacayak T., Duzyol S.
Страници: 179-186
Публикувана: 6 Sep 2018
Преглеждания: 2,466
Изтегляния: 367
Citations: 4 (Google Scholar)
Citations: 2 (OpenAlex)
Резюме: It is possible to evaluate the excessive amount of fine-size coal, which is produced by increasing of mechanised excavation in the coal mining, by oil agglomeration method. In this study, the possible beneficiation of Alpagut-Dodurga (Corum) coal with oil agglomeration under different conditions was investigated. Oil type and amount, pH, agglomeration time and stirring speed were selected as operating parameters of oil agglomeration method. Sixteen agglomeration tests were carried out under different conditions with the Taguchi (L16) experimental design and the test results were evaluated by the combustible recovery (CR) depending on their ash contents. The signal/noise (S/N) ratios of each test were calculated and optimization test was performed under the conditions recommended by the Minitab 16.0. From the test results, the highest CR and S/N ratio were obtained from Test 8 and compared to the verification test. The S/N ratio and average CR were obtained as to be 28.98 and 59.24%, respectively. In addition, the contributions of each factor to oil agglomeration of coal were determined with variance analysis (ANOVA).
Ключови думи: taguchi method, oil agglomeration, coal, minitab 16.0
Цитирайте тази статия: Agacayak T., Duzyol S.. OPTIMIZATION OF OIL AGGLOMERATION BEHAVIOUR OF COAL BY TAGUCHI DESIGN. Journal of International Scientific Publications: Materials, Methods & Technologies 12, 179-186 (2018). https://www.scientific-publications.net/en/article/1001694/
Обратно към съдържанието на тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
