STUDY ON THE IMPACT OF DEFOAMING AGENT ON THE EFFICIENCIES OF SEPARATION BY DISTILLATION
Zhelcho St. Stefanov, Mariana Kr. Karaivanova
Страници: 479-485
Публикувана: 1 Jan 2012
Преглеждания: 606
Изтегляния: 67
Резюме: The effect of a defoaming agent on the gas-liquid layer height and, respectively, the size of the interphase surface and hence on the degree of separation by distillation was studied. The experimental results obtained with a model mixture methanol-water were carried out in a laboratory sieve-plate glass column in presence of defoaming agent SIHA Silicone defoamer SE. The comparative analysis of the model mixture studied with and without defoaming agent showed that the presence of defoaming agent gave foam height about 2 – 2.5 times smaller yet at vapor velocity in the column with defoaming agent about 1.5 times higher than that without defoaming agent. The values of the local efficiency in presence of defoaming agent were about 10% lower. This certainly confirms the fact that the lower foam height in presence of defoaming agent, i.e. the smaller interphase area, results in decreased process efficiency.
Ключови думи: distillation, local efficiency, defoaming agent, lower boiling component (lbc), higher boiling component (hbc), surface tension
Цитирайте тази статия: Zhelcho St. Stefanov, Mariana Kr. Karaivanova. STUDY ON THE IMPACT OF DEFOAMING AGENT ON THE EFFICIENCIES OF SEPARATION BY DISTILLATION. Journal of International Scientific Publications: Materials, Methods & Technologies 6, 479-485 (2012). https://www.scientific-publications.net/en/article/1003231/
Обратно към съдържанието на тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
