STUDY OF GAS FLOW MALDISTRIBUTION IN COLUMNS WITH MODERN RANDOM PACKINGS
Simeon Darakchiev
Страници: 116-123
Публикувана: 1 Jan 2011
Преглеждания: 448
Изтегляния: 59
Резюме: Gas flow distribution in columns with packing Raschig – super ring is studied. So far such studies have been made with packed layer height up to 1.3 m. Of interest is the flow behavior at higher layers, as in this case usually occurs the so called “wall flow”. Experiments are carried out in a column with a diameter of 0.47 m and a layer height to 2.1 m. The measurements were made at three different velocities and the velocity profile is measured by thermo anemometer in 123 points on the column cross-section at different layer heights. The non-uniformity is determined using the so-called maldistribution factor Mf, which takes into account as the velocity value at a point of the cross-section as its weight in the flow. The lowest value of Mf is found at height of 0.5 m and is found that increasing the layer height, the maldistribution begins to rise.
Ключови думи: packed columns, random packings, gas distribution, maldistribution factor
Цитирайте тази статия: Simeon Darakchiev. STUDY OF GAS FLOW MALDISTRIBUTION IN COLUMNS WITH MODERN RANDOM PACKINGS. Journal of International Scientific Publications: Materials, Methods & Technologies 5, 116-123 (2011). https://www.scientific-publications.net/en/article/1003325/
Обратно към съдържанието на тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
