GAS-HOLD-UP AND BUBBLE SIZE DISTRIBUTION IN A FIBROUS FIXED BED BIOFILM REACTOR
Martin Martinov, Dimiter Hadjiev, Serafim Vlaev
Страници: 454-466
Публикувана: 1 Jan 2010
Преглеждания: 427
Изтегляния: 60
Резюме: In this paper, the gas-liquid dispersion in a biofilm reactor with fibrous structured packing is studied. The reactor is operated with Pseudomonas putida aimed in waste water treatment. Gas hold-up and bubble size distribution are determined. The properties of the gas dispersion proved to be stabilized by the fibrous bed presence and showed improvement of the dispersion parameter by the packing. Apart from showing high gas hold-up and low bubble size due to surface active and viscous dissolved elements, the biochemical reaction did not pose any significant additional effect. The results are shown to be comparable with previous studies of mesh wire packing. An empirical equation is proposed that relates gas hold-up with all studied variables.
Ключови думи: fibrous fixed bed biofilm reactor, gas hold-up, bubble size distribution
Цитирайте тази статия: Martin Martinov, Dimiter Hadjiev, Serafim Vlaev. GAS-HOLD-UP AND BUBBLE SIZE DISTRIBUTION IN A FIBROUS FIXED BED BIOFILM REACTOR. Journal of International Scientific Publications: Materials, Methods & Technologies 4, 454-466 (2010). https://www.scientific-publications.net/en/article/1003397/
Обратно към съдържанието на тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
