CATALYTIC DEHYDROGENATION OF PROPANE IN A MEMBRANE REACTOR WITH PD-6%IN-0.5%RU AND PD-6%RU FOILS
Ludmila P. Didenko, Larisa A. Sementsova, Petr E. Chizhov, Leonid A. Bikov
Pages: 305-312
Published: 10 Jul 2016
Views: 1,891
Downloads: 368
Abstract: Propane dehydrogenation in a membrane reactor on the АОК-73-24 industrial chromia–alumina catalyst is studied at 773–873 K. Membranes based on a 30 μm thick foils made of the Pd–6%In–0.5%Ru and Pd-6%Ru alloys are used. It is shown that because of a high hydrogen permeability of the Pd-In-Ru membrane there is a fast deactivation of the catalytic system due to the formation of carbon deposits. When using Pd-Ru membranes with lower hydrogen permeability, the deactivation rate of the catalytic system decreases and the yield of propylene becomes higher than that achieved in the “non-membrane” process.
Keywords: propane dehydrogenation, membrane reactor, foil, palladium alloys
Cite this article: Ludmila P. Didenko, Larisa A. Sementsova, Petr E. Chizhov, Leonid A. Bikov. CATALYTIC DEHYDROGENATION OF PROPANE IN A MEMBRANE REACTOR WITH PD-6%IN-0.5%RU AND PD-6%RU FOILS. Journal of International Scientific Publications: Materials, Methods & Technologies 10, 305-312 (2016). https://www.scientific-publications.net/en/article/1001153/
© 2024 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License http://creativecommons.org/licenses/by/3.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Download full text
Back to the contents of the volume