ANALYSIS OF THE CONDITIONS FOR SELF-FEEDING IN SEPARATOR TOOLS FOR SURFACE PLASTIC DEFORMATION
Nely Asenova Georgieva, Veselin Ivanov Grigorov, Stefan Vasilev Kostadinov
Страницы: 498-514
Опубликовано: 1 Jan 2010
Просмотры: 471
Загрузки: 73
Аннотация: It is theoretically analyzed the influence of crossing the instrument axis and the conical deformed rollers in terms of the self-feeding through surface plastic deformation (SPD) over the ratio between the size of the contact zones of deformation elements with supporting cone and the machining details. It is established the presence of local extremes of this ratio with an amendment of the crossing angle. The possibility for different conditions of transmission of torque through the tool’ work is shown so as to achieve greater processing speeds and to use more large deformation forces.
Ключевые слова: surface plastic deformation, self-feeding, contact zones
Цитировать эту статью: Nely Asenova Georgieva, Veselin Ivanov Grigorov, Stefan Vasilev Kostadinov. ANALYSIS OF THE CONDITIONS FOR SELF-FEEDING IN SEPARATOR TOOLS FOR SURFACE PLASTIC DEFORMATION. Journal of International Scientific Publications: Materials, Methods & Technologies 4, 498-514 (2010). https://www.scientific-publications.net/en/article/1003400/
Вернуться к содержанию тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
