STRENGTH DESIGN WITH ORIENTATION ANGLE DESIGN VARIABLES
Eva Kormaníková, Kamila Kotrasová
Страницы: 117-126
Опубликовано: 1 Jan 2009
Просмотры: 452
Загрузки: 58
Аннотация: The design of a composite laminate is a combinatorial problem with layer thickness and orientation angles design variables. The majority of the commercially avalaible optimization software is for continuous-valued design variables with orientations taking any value between 0o and 90o. The optimization problem with strength constraints were formulated to minimize the laminate weight. In weight minimization problem, orientation variables influence only the strength constrains.
Ключевые слова: laminated 2d structures, strength design, sensitivity analysis, orientation angles design variables
Цитировать эту статью: Eva Kormaníková, Kamila Kotrasová. STRENGTH DESIGN WITH ORIENTATION ANGLE DESIGN VARIABLES. Journal of International Scientific Publications: Materials, Methods & Technologies 3, 117-126 (2009). https://www.scientific-publications.net/en/article/1003468/
Вернуться к содержанию тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
