VINYL IMIDAZOLE BASED GALLIC ACID IMPRINTED POLYMERS
T. Inanan
Страници: 162-172
Публикувана: 23 Sep 2021
Преглеждания: 1,841
Изтегляния: 238
Резюме: The aim of this study was to prepare vinyl imidazole (VIM) based gallic acid (GA) imprinted polymers and to optimize their adsorption properties. GA, that is a natural bioactive compound with anti-oxidant, anti-inflammatory, anti-cancer, and anti-viral activities, imprinted by emulsion polymerization using VIM as the functional monomer and EGDMA as the cross-linker. GA-MIPs were characterized by FTIR spectroscopy, Zeta sizer and Zeta potential analysis. GA adsorption onto GA-MIPs was optimized and results demonstrated that maximum adsorption capacity was determined as 1012.4 ± 44.9 mg GA/g MIPs in the optimum conditions (75 min using 0.9 mg GA-MIPs in H2O at 25°C). IF value for 100 ppm was calculated higher than other concentrations and thus, selectivity studies were performed using 100 ppm GA and 100 ppm its analogue. Selectivity coefficient values showed that GA-MIPs adsorbed more GA as compared to HB and CA analogues. All relative selectivity coefficients greater than 1 has showed that GA-MIPs adsorbed more GA than its analogues as regards to GA-NIPs. Relative selectivity values for GA-CA and GA-PCA pairs were calculated high as 5.6 and 5.1, respectively. Brewed tea and clove extract were selected as real samples due to extensive use in Turkey. GA was recovered selectively with high percentages recoveries from GA-MIPs.
Ключови думи: gallic acid, molecular imprinting, 1-vinylimidazole, selectivity
Цитирайте тази статия: T. Inanan. VINYL IMIDAZOLE BASED GALLIC ACID IMPRINTED POLYMERS. Journal of International Scientific Publications: Materials, Methods & Technologies 15, 162-172 (2021). https://www.scientific-publications.net/en/article/1002208/
Обратно към съдържанието на тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
