STRUKTURE EVOLUTION OF MULTILAYER MATERIALS OF HEAT-RESISTANT INTERMETALLIC COMPOUNDS UNDER THE INFLUENCE OF TEMPERATURE IN THE PROCESS OF DIFFUSION WELDING UNDER PRESSURE AND THEIR MECHANICAL PROPERTIES
Valeriy P. Korzhov, Michael I. Karpov, Dmitriy V. Prokhorov
Страници: 343-361
Публикувана: 1 Jan 2013
Преглеждания: 641
Изтегляния: 64
Резюме: Multilayer materials of high-resistant intermetallic compounds of some transition metals with aluminum and silicon were obtained by diffusion welding of packages, collected from a large number of the respective foils, such as niobium and aluminum. Materials of intermetallics with silicon were obtained by the welding of packages built from metal foils with Si-coating. The change in the structure according to the temperature of the welding was studied, and the high-temperature bending strength was determined.
Ключови думи: multilayer composite, high-resistant material, intermetallic compound, diffusion welding
Цитирайте тази статия: Valeriy P. Korzhov, Michael I. Karpov, Dmitriy V. Prokhorov. STRUKTURE EVOLUTION OF MULTILAYER MATERIALS OF HEAT-RESISTANT INTERMETALLIC COMPOUNDS UNDER THE INFLUENCE OF TEMPERATURE IN THE PROCESS OF DIFFUSION WELDING UNDER PRESSURE AND THEIR MECHANICAL PROPERTIES. Journal of International Scientific Publications: Materials, Methods & Technologies 7, 343-361 (2013). https://www.scientific-publications.net/en/article/1003066/
Обратно към съдържанието на тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
