INHIBITION AS A METHOD OF AN IN-CYLINDER CATALYTIC COATING TESTING
Mykola Bannikov, Igor Vasilev
Страници: 1-7
Публикувана: 29 May 2015
Преглеждания: 4,158
Изтегляния: 839
Citations: 3 (Google Scholar)
Резюме: In-cylinder catalytic coatings are used to improve IC engine performance and emission. Experimental investigations of coatings are normally accompanied with engine reassembly that leads to irreproducibility of results. Coatings can also change the conditions of mixture preparation and combustion. The factors mentioned above make it difficult to assess the catalytic activity of the coating. To eliminate the irreproducibility mentioned above and isolate the effects of a catalyst, an inhibition technique of in-cylinder coating testing has been proposed. The method consists in the “in situ” poisoning of the catalyst by inhibitors. With this method the engine is tested before and after inhibiting without reassembly and the results obtained can be attributed to the coating with more confidence. The applicability of inhibition method has been proved experimentally. An indirect-injection diesel engine with combustion chamber of variable geometry (VG), coated by MoSi2 and ZrO2 catalysts was tested using inhibition technique and a positive effect of the coatings on engine emission has been shown.
Ключови думи: ic engine emission, catalyst, in-cylinder coating, inhibition
Цитирайте тази статия: Mykola Bannikov, Igor Vasilev. INHIBITION AS A METHOD OF AN IN-CYLINDER CATALYTIC COATING TESTING. Journal of International Scientific Publications: Materials, Methods & Technologies 9, 1-7 (2015). https://www.scientific-publications.net/en/article/1000747/
Обратно към съдържанието на тома
© 2026 The Author(s). This is an open access article distributed under the terms of the
Creative Commons Attribution License https://creativecommons.org/licenses/by/4.0/, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. This permission does not cover any third party copyrighted material which may appear in the work requested.
Disclaimer: The Publisher and/or the editor(s) are not responsible for the statements, opinions, and data contained in any published works. These are solely the views of the individual author(s) and contributor(s). The Publisher and/or the editor(s) disclaim any liability for injury to individuals or property arising from the ideas, methods, instructions, or products mentioned in the content.
